Skip to main content

Wake on LAN

Wake on LAN allows you to power on or wake a device by sending a network “magic packet”.

ArkKVM lets you send a magic packet directly from the WebUI.

Enter the target device’s MAC address to wake it from anywhere. The target device does not need to be physically connected to ArkKVM via USB or HDMI.

info
  • The target device must support Wake-on-LAN and be properly configured
  • Make sure Wake-on-LAN is enabled in the target device’s BIOS/UEFI and operating system
  • Wake-on-LAN typically works within the same local network